CLA 30
Dynamic load up to 8.000 N
Acme screw linear actuator with integrated end stroke switches in compact design. Bronze worm wheel and bronze acme nut for high reliability and longer lifetime. Push or pull load. Gear housing in aluminium alloy, protective tube in anodized aluminium. Push rod in hard crome plated steel tube. Maintenance free. Lifelong grease lubricant.
-------------------------------------------------------------------
Max load [N] 8.000
Max linear speed [mm/sec] 46
Standard strokes lenghts [mm] 100, 200, 300, 400, 500
-------------------------------------------------------------------
Main features :
Rod diameter [mm] 35
Protective tube diameter [mm] 55
Motor flange European standard IEC 63 B14
Max static load - pull [N] 10.000
Max static load - push [N] 12.000
Actuator weight stroke 100 mm without motor [kg] 5
Additional weight each 100 mm 0,8
Duty cycle 30% over 10 min at 25°C room temperature.
3 worm gear ratios available.
7 different linear speeds availanle.
Acme screw 1 or 2 starts.
Lifelong grease lubricant for environmental temperature from -15 °C to +40 °C.
On request:
special execution for lower or higher environmental temperatures;
customized stroke lengths lower or higher than standard strokes;
push rod or protective tube in stainless steel;
special executions for applications in food or chemical industries;
motor mounting position on the opposite side (left hand);
rear fixing turned 90°.
--------------------------------------------------------------------------------
Input versions :
Standard motor flange IEC 63 B14;
motor flange and extended input shaft;
single input shaft;
double input shaft.
-------------------------------------------------------------------
Electric motors :
AC 3-phases 230 / 400 V 50 Hz IP 55 F, 2 or 4 poles, with ventilation system;
AC motor 1-phase 230 V 50 Hz IP 55 F, 2 or 4 poles with ventilation system;
DC motor 12 V or 24 V IP 54 F, without fan.
AC and DC motors available with or without brake.
AC motors in multivoltage executions, can operate also at 60 Hz.
On request: special voltages, special wiring protections and insulations.
Acme screw actuators are statically self-locking. Brake motor is recommended for stopping accuracy.
-------------------------------------------------------------------
Accessories :
2 adjustable end stroke switches cam-operated.
3 adjustable switches cam-operated (2 end stroke switches, 1 for intermediate position).
Front attachments: clevis end, ball joint, rod end.
Overload safety clutch.
Rear fixing bracket.
Rotative potentiometer single turn, 5 kOhm, for positioning control.
|
